EXTRA Glue Tiled cement based

DESCRIPTION:

Special dry adhesive based on cement and silica sand, polymer additives, used in the lining of the internal and external surfaces. It is used for bonding to the surface of the bathroom, swimming pool and other wet areas tile, ceramic tiles, marble tiles, etc.

APPLICATION:

The surface must be cleaned from dust, oil, paint, etc. If the surface temperature is above 25*C, then you need to moisten the surface with water. The required amount of solution to pour into the container of water and stir (preferably with a mixer) until the disappearance of lumps. The mixture needs to stand for 10 minutes. Then mix well and then apply. Solution spread on the surface with trowel with suitable dies. Prepared for use solution should be used within 2-3 hours. Otherwise it cannot be used by adding to the solution water or glue. Grouting should be performed after 24 hours.

Required ambient temperature +10*C +35*C.

Buy from the manufacturer

  • Logo 05
  • Logo 01
  • Logo 04
  • Logo 02
  • Logo 03
  • Logo 06
  • Logo 08
Яндекс.Метрика